Team Corally - COR00250 1/10 Triton SP 2WD Monster Truck Brushed RTR (No Battery or Charger)
1/10 Triton SP 2WD Monster Truck Brushed RTR (No Battery or Charger)
1/10 TRITON SP 2WD Monster Truck RTR
The TRITON SP is supplied as a fully pre-assembled model, ready to run. The battery pack, suitable charger and 4 AA batteries are not included in the kit and must be purchased separately.
Durability and robustness
This truck is made with the best materials. All chassis and suspension parts are made of the special composite material HiCC8. This composite material has been specially formulated for Team Corally to ensure the strength and durability of the parts.
Team Corally does not believe in plastic driveline components. That’s why the TRITON SP is equipped as standard with steel drive and wheel shafts, a transmission with strong wear-resistant metal gears and a professional adjustable slipper- clutch to distribute the forces. The drivetrain of the TRITON SP arrives ready to receive the most powerful brushless motor upgrade. In short, you don't need expensive tuning parts to make your drivetrain bullet proof.
The TRITON SP has a monocoque chassis made of the special composite material HiCC8. The design guarantees extraordinary rigidity and torsional stiffness. The “stepped” design delivers a high degree of ground clearance, meaning that rough terrain is really no problem for the TRITON SP. The short wheelbase makes the TRITON SP extremely fun to drive. Under hard acceleration, the truck stands gallantly on the rear wheels.
To brave harsh terrain, a good suspension system is vital. The TRITON SP is equipped with oversized suspension elements made of the special composite material HiCC8. The shock absorbers are "Big Bore" type (ø16mm), with much more volume and therefore a much better damping than the smaller shock absorbers that are standard on most 1/10 scale models. The shock bodies are threaded for easy and precise spring tension adjustment.
Motor and transmission
The TRITON SP is equipped with a powerful 15T Speed-X 550 type motor. This motor provides a perfect balance between power, speed and run time. The TRITON SP is equipped as standard with steel drive and wheel shafts, a transmission with strong wear-resistant metal gears and a professional adjustable slipper clutch to distribute the forces. The differential is equipped with 6 heavy-duty satellite gears and is able to withstand the most powerful brushless motors.
The TRITON SP is equipped with a Varioprop® S2R digital proportional radio control with interference-free 2.4gHz technology with 300m range. The comfortable transmitter has various adjustment options such as: Dual rate, EPA, precision trim function, etc. The receiver has a special protective coating against moisture and splashes. The factory- installed digital Varioprop® CR-7209 steering servo is oversized compared with most cars in this class. It’s water- resistant, precise, fast and has an extraordinary torque of 9kg/cm. It also features an aluminum housing for extra cooling, all-metal gears and ball bearings.
The "brushed" electronic speed controller CORA-40 is specially made by HW for Team Corally. The CORA-40 speed controller is water resistant and is suitable for both Ni-MH and Lipo batteries. The ESC is equipped with various safety features such as overload, overtemperature, undervoltage, etc.
The TRITON SP is powerful and likes to ride on its rear wheels. That's why a wheelie bar is standard, so punch it and balance on the rear wheels.
The Triton SP comes with strong and impact-resistant polycarbonate body that has been factory painted in an attractive blue metallic color, decorated with attractive stickers and topped off with an efficient roll bar.
Features TRITON SP
o Waterproof Cora 40 2-3S brushed ESC with adjustable LiPo cutoff and reverse lockout
o Speed-X 550 type 15 Turn 2S High-Torque brushed motor
o Varioprop® CR-7209-MG Digital Servo, metal gears, 9 Kg Torque
o Ergonomic Varioprop® S2R Radio, with 2.4gHz interference-free technology
o Top speed 45 km/h with optional 16T pinion
o Steel driveshafts and axles
o 12 mm hard coated aluminum wheel hex adapters
o Bulletproof, low friction metal gear transmission with sealed heavy-duty gear differential
o 32dp composite main gear with slipper clutch
o 12 precision sealed ball bearings
o Aluminum motor mount
o Steel Steering Turnbuckles
o 16 mm adjustable oil-filled Big-Bore shocks
o Maintenance-friendly composite monocoque chassis made from HiCC8 composite material o Large battery tray for common NiMH and 2-3S battery packs
o Suspension elements made from HiCC8 composite material
o Durable front bumper with skid plate
o Polycarbonate painted bodyshell with durable roll-cage
o Adjustable body mounts made from HiCC8 composite material
o Pre-glued High-Grip Monster Truck tires on black 6-spoke wheels
o Factory-fitted wheelie bar
o Water- and dust resistant receiver compartment
Technical Specifications Length: 460 mm
Height: 253 mm
Width: 332 mm
Wheelbase: 265 mm
Motor: SPEED-X 550 Brushed ESC: TC CORA-40
Battery: Not Included Servo: Digital CR-7209-MG
Items Required for Completion o 7.4v LiPo battery
o Suitable battery charger
o 4 x AA Alkaline Dry-Cells